Page All:
Page 1
Holston Micro Systems Introduces Blackfin RJ Network Interface Module
10/100/1000Base-T to PCI-e adapters offers reduced size, weight and cost
WELLINGTON, Fla., Jan. 9, 2015 /PRNewswire/ -- Holston Micro Systems, an innovation leader in modular solutions for copper and optical communications networks, today introduced the Blackfin RJ 10/100/1000Base-T to PCI-Express network adapters. Blackfin RJ pluggable network adapters provide a complete modular network adapter interface implemented in an extremely small and light weight configuration. The small size and light weight of the Blackfin RJ pluggable network adapter modules make these units especially well-suited to applications where platform size constraints, installation in difficult to access areas or platform mobility are important design considerations.
http://photos.prnewswire.com/prnvar/20150109/168155
Blackfin RJ network adapters integrate an Intel I210 PCI-Express network controller plus isolation filters and transformers into a modular pluggable component with an RJ-45 interface. Holston Micro Systems offers alternative modules with MMF or SMF LC fiber optic connectors enabling the same motherboard to support either copper or fiber optic network cable infrastructures without redesign.
http://photos.prnewswire.com/prnvar/20150109/168188
Blackfin RJ pluggable network adapters support the IEEE-802az Energy Efficient Ethernet (EEE) standard. During periods of low network activity, EEE reduces platform power consumption by negotiating with its link partner to transition to a low power idle (LPI) operating mode. The motherboard electrical interface for the Blackfin RJ pluggable network adapter is a *Samtec SMT connector with a 20 position footprint. The RJ-45 connector interface supports most popular UTP and STP network media options including CAT 3, 4, 5 and 6 cable structures.
http://photos.prnewswire.com/prnvar/20150109/168189
Key Features:
-- Complete PCI-Express network adapter integrated into an RJ-45 connector
form factor
-- Intel(®*) I210 Ethernet Controller for PCI Express Gen 2.1 @ 2.5GT/s
for x1 width (Lane)
-- Pluggable unit can be swapped for fiber optic LC modules with identical
motherboard layout
-- IEEE 802.3, 802.3u, 802.3ab compliant for multi-rate network topology
support
-- Automatic cable crossover detection function (MDI/MDI-X) configures
interface polarity as required
-- Intel System Management Bus (SMBus) pass through enables IPMI / BMC
configuration of controller interface
Availability
These devices are now sampling.
About Holston Micro Systems
Holston Micro Systems is a supplier of high-performance network interface modules, application software and integrated turnkey systems solutions used primarily in Carrier, Enterprise and industrial Internet of Things (IoT) network applications. We design, develop and market a diverse portfolio of high-performance, feature-rich, low-power and cost-competitive Ethernet networking and connectivity solutions, associated applications and protocol software.
*Samtec is a registered trademark of Samtec Incorporated in the USA and other countries.
*Intel is a registered trademark of Intel Corporation in the USA and other countries.
Contacts
Sales Manager
Holston Micro Systems
125 South State Road 7
Suite 104-222
Wellington, FL 33414
+1.484.278.1737
info@holstonmicro.com
Photo - http://photos.prnewswire.com/prnh/20150109/168155
Photo - http://photos.prnewswire.com/prnh/20150109/168188
Photo - http://photos.prnewswire.com/prnh/20150109/168189
SOURCE Holston Micro Systems
Photo:http://photos.prnewswire.com/prnh/20150109/168155
http://photoarchive.ap.org/
Photo:http://photos.prnewswire.com/prnh/20150109/168188
http://photoarchive.ap.org/
Photo:http://photos.prnewswire.com/prnh/20150109/168189
http://photoarchive.ap.org/
Holston Micro Systems
Web Site: http://holstonmicro.com
Holston Micro Systems Introduces Blackfin RJ Network Interface Module
10/100/1000Base-T to PCI-e adapters offers reduced size, weight and cost
WELLINGTON, Fla., Jan. 9, 2015 /PRNewswire/ -- Holston Micro Systems, an innovation leader in modular solutions for copper and optical communications networks, today introduced the Blackfin RJ 10/100/1000Base-T to PCI-Express network adapters. Blackfin RJ pluggable network adapters provide a complete modular network adapter interface implemented in an extremely small and light weight configuration. The small size and light weight of the Blackfin RJ pluggable network adapter modules make these units especially well-suited to applications where platform size constraints, installation in difficult to access areas or platform mobility are important design considerations.
http://photos.prnewswire.com/prnvar/20150109/168155
Blackfin RJ network adapters integrate an Intel I210 PCI-Express network controller plus isolation filters and transformers into a modular pluggable component with an RJ-45 interface. Holston Micro Systems offers alternative modules with MMF or SMF LC fiber optic connectors enabling the same motherboard to support either copper or fiber optic network cable infrastructures without redesign.
http://photos.prnewswire.com/prnvar/20150109/168188
Blackfin RJ pluggable network adapters support the IEEE-802az Energy Efficient Ethernet (EEE) standard. During periods of low network activity, EEE reduces platform power consumption by negotiating with its link partner to transition to a low power idle (LPI) operating mode. The motherboard electrical interface for the Blackfin RJ pluggable network adapter is a *Samtec SMT connector with a 20 position footprint. The RJ-45 connector interface supports most popular UTP and STP network media options including CAT 3, 4, 5 and 6 cable structures.
http://photos.prnewswire.com/prnvar/20150109/168189
Key Features:
-- Complete PCI-Express network adapter integrated into an RJ-45 connector
form factor
-- Intel(®*) I210 Ethernet Controller for PCI Express Gen 2.1 @ 2.5GT/s
for x1 width (Lane)
-- Pluggable unit can be swapped for fiber optic LC modules with identical
motherboard layout
-- IEEE 802.3, 802.3u, 802.3ab compliant for multi-rate network topology
support
-- Automatic cable crossover detection function (MDI/MDI-X) configures
interface polarity as required
-- Intel System Management Bus (SMBus) pass through enables IPMI / BMC
configuration of controller interface
Availability
These devices are now sampling.
About Holston Micro Systems
Holston Micro Systems is a supplier of high-performance network interface modules, application software and integrated turnkey systems solutions used primarily in Carrier, Enterprise and industrial Internet of Things (IoT) network applications. We design, develop and market a diverse portfolio of high-performance, feature-rich, low-power and cost-competitive Ethernet networking and connectivity solutions, associated applications and protocol software.
*Samtec is a registered trademark of Samtec Incorporated in the USA and other countries.
*Intel is a registered trademark of Intel Corporation in the USA and other countries.
Contacts
Sales Manager
Holston Micro Systems
125 South State Road 7
Suite 104-222
Wellington, FL 33414
+1.484.278.1737
info@holstonmicro.com
Photo - http://photos.prnewswire.com/prnh/20150109/168155
Photo - http://photos.prnewswire.com/prnh/20150109/168188
Photo - http://photos.prnewswire.com/prnh/20150109/168189
SOURCE Holston Micro Systems
Photo:http://photos.prnewswire.com/prnh/20150109/168155
http://photoarchive.ap.org/
Photo:http://photos.prnewswire.com/prnh/20150109/168188
http://photoarchive.ap.org/
Photo:http://photos.prnewswire.com/prnh/20150109/168189
http://photoarchive.ap.org/
Holston Micro Systems
Web Site: http://holstonmicro.com