Page All:
Page 1
Vectron International Announces Smallest Low-noise OCXO
OX-405 Four-pin Dip and Hermetic Seal Ideal for Harsh Environment Radar Applications
HUDSON, N.H., May 26 -- Vectron International, a leader in the design, manufacture and marketing of Precision Frequency Control and Timing Solutions, today announced its OX-405, a low-noise, small form factor oven-controlled crystal oscillator (OCXO) targeted specifically at harsh environment radar applications. Both airborne and ground based radars will benefit from the OX-405's small size and phase noise performance. The company will showcase this new product in Booth 1615 at the 2010 IEEE MTT-S International Microwave Symposium, to be held May 25-27, 2010 in Anaheim, California.
The OX-405 is the smallest low noise (below -165 dBc/Hz) OCXO at 100 MHz and is able to achieve this performance level while maintaining state-of-the-art close-in phase noise. "In the past, phase noise performance at these levels was only possible with significantly larger OCXOs," said Dave Bail, director of product marketing, Vectron International. "This product will allow design engineers to meet the lower size, weight and power restrictions they are currently facing. In addition, we designed the OX-405 with a four-point mount SC-cut crystal, making it ideal for applications where shock, acceleration and harsh environments are of concern."
"In military electronics, the strong trends towards miniaturization and reduced power consumption continue. At the same time, performance cannot be sacrificed," said Gregory Smolka, vice president, Industrial, Military and Space business unit, Vectron International. "With the introduction of the OX-405 as well as our other new low phase noise products, we are offering designers unprecedented noise specifications at the smallest size available in the market."
Specific features of the OX-405 include:
-- Small form factor 20x13mm hermetic package
-- Excellent phase noise performance at 100 MHz
-- -125 dBc/Hz at 100 Hz offset
-- -165 dBc/Hz Noise Floor
-- Ruggedized Four-Point Mount SC-Cut Crystal
Vectron's OX-405 is available direct at http://www.vectron.com or through an authorized Vectron representative. For more information on this or any other Vectron products please contact a customer service representative at 1-88-VECTRON-1 or visit http://www.vectron.com.
About Vectron International
Vectron International is a world leader in the design, manufacture and marketing of frequency control, sensor, and hybrid product solutions. Vectron solves complex timing, filtering and sensor challenges by delivering customized solutions that speed time to market and offer low total cost of ownership. Vectron uses the very latest techniques in both bulk acoustic wave (BAW) and surface acoustic wave (SAW) based designs from DC to microwave frequencies. Committed to the industry's highest quality service standard and complete satisfaction, Vectron International leverages its global footprint and 50 years of experience to help customers achieve competitive differentiation and improve their bottom line. Vectron International is headquartered in Hudson, NH and has operating facilities and sales offices in North America, Europe and Asia. For more information, please call 1-88-VECTRON-1 or visit http://www.vectron.com.
Media Relations Contacts:
Bill Holbrook Stephanie Lin
(603) 578-3052 (617) 587-2969
bholbrook@vectron.comslin@brodeur.com
Source: Vectron International
CONTACT: Bill Holbrook of Vectron International, +1-603-578-3052,
bholbrook@vectron.com; or Stephanie Lin for Vectron International,
+1-617-587-2969, slin@brodeur.com
Web Site: http://www.vectron.com/
Vectron International Announces Smallest Low-noise OCXO
OX-405 Four-pin Dip and Hermetic Seal Ideal for Harsh Environment Radar Applications
HUDSON, N.H., May 26 -- Vectron International, a leader in the design, manufacture and marketing of Precision Frequency Control and Timing Solutions, today announced its OX-405, a low-noise, small form factor oven-controlled crystal oscillator (OCXO) targeted specifically at harsh environment radar applications. Both airborne and ground based radars will benefit from the OX-405's small size and phase noise performance. The company will showcase this new product in Booth 1615 at the 2010 IEEE MTT-S International Microwave Symposium, to be held May 25-27, 2010 in Anaheim, California.
The OX-405 is the smallest low noise (below -165 dBc/Hz) OCXO at 100 MHz and is able to achieve this performance level while maintaining state-of-the-art close-in phase noise. "In the past, phase noise performance at these levels was only possible with significantly larger OCXOs," said Dave Bail, director of product marketing, Vectron International. "This product will allow design engineers to meet the lower size, weight and power restrictions they are currently facing. In addition, we designed the OX-405 with a four-point mount SC-cut crystal, making it ideal for applications where shock, acceleration and harsh environments are of concern."
"In military electronics, the strong trends towards miniaturization and reduced power consumption continue. At the same time, performance cannot be sacrificed," said Gregory Smolka, vice president, Industrial, Military and Space business unit, Vectron International. "With the introduction of the OX-405 as well as our other new low phase noise products, we are offering designers unprecedented noise specifications at the smallest size available in the market."
Specific features of the OX-405 include:
-- Small form factor 20x13mm hermetic package
-- Excellent phase noise performance at 100 MHz
-- -125 dBc/Hz at 100 Hz offset
-- -165 dBc/Hz Noise Floor
-- Ruggedized Four-Point Mount SC-Cut Crystal
Vectron's OX-405 is available direct at http://www.vectron.com or through an authorized Vectron representative. For more information on this or any other Vectron products please contact a customer service representative at 1-88-VECTRON-1 or visit http://www.vectron.com.
About Vectron International
Vectron International is a world leader in the design, manufacture and marketing of frequency control, sensor, and hybrid product solutions. Vectron solves complex timing, filtering and sensor challenges by delivering customized solutions that speed time to market and offer low total cost of ownership. Vectron uses the very latest techniques in both bulk acoustic wave (BAW) and surface acoustic wave (SAW) based designs from DC to microwave frequencies. Committed to the industry's highest quality service standard and complete satisfaction, Vectron International leverages its global footprint and 50 years of experience to help customers achieve competitive differentiation and improve their bottom line. Vectron International is headquartered in Hudson, NH and has operating facilities and sales offices in North America, Europe and Asia. For more information, please call 1-88-VECTRON-1 or visit http://www.vectron.com.
Media Relations Contacts:
Bill Holbrook Stephanie Lin
(603) 578-3052 (617) 587-2969
bholbrook@vectron.comslin@brodeur.com
Source: Vectron International
CONTACT: Bill Holbrook of Vectron International, +1-603-578-3052,
bholbrook@vectron.com; or Stephanie Lin for Vectron International,
+1-617-587-2969, slin@brodeur.com
Web Site: http://www.vectron.com/